The Cyclone & Multi-Cyclone is a separator that uses centrifugal force to purify air loaded with chips or dust. Its performance depends on the rotation speed, density and grading of particles. Cyclones are available with a wide range of accessories.

•    Efficiency approx. 90% for particles above 15 micron.
•    Higher efficiency for large particles.
•    Built in 3 and 8 mm thick steel sheet depending on the size.

Theoretically, high-collection efficiencies are achieved with this smaller 6" or 9" diameter tubes, since the centrifugal force applied to the dust particles increases as the tube diameter decreases. Three other major design factors also significantly affect collection efficiency, namely proper gas distribution, draft loss, and particle size/specific gravity.

A collector consists of a housing containing a quantity of collecting tube assemblies, each an individual centrifugal dust collector.
Dust laden gas enters the top of the collecting tube through the inlet guide vanes. These vanes impart a smooth, fast spiral to the gas, setting up a highly centrifugal action with a minimum of turbulence and erosion.

Fields of application:

Gas
Rockwool
Bagasse
Lime dust
Glass beads
Sludge
Coke calciner
Sulfur dust
Sinter dust
Feldspar
Clinker cooler dust
Iron ore pellets/dust
Rice hulls
Petroleum coke
Sulfite
Wood waste/bark (various types)
Coal (various types)
Miscellaneous refuse

Today, we predominantly use Multi-Cyclone separators when dealing with large amounts of material, as a primary separator for exhaust and filter systems, or even to separate sparks or droplets. They work without additional cleaning technology using centrifugal separation. They function reliably, are low maintenance and are insensitive to irregular material flow. They are well known for their robust operation.

To achieve optimum separation efficiency, various models allow an adjustment to each set of operational circumstances (flow volume and level of material).

For customer-specific solutions, HAS.CO offers solidly built Multi-Cyclone separators made of a variety of materials. On request they will be designed to be pressure-shock-resistant or can be supplied with wear protection.


Could not load widget with the id 57.